qq_tracker_code_advanced_default

Definitive XBox 360 Mac Burning Guide

84

Comodo

Due to the very many requests I receive asking how to burn XBox360 backups on a mac, I’ve decided to put together a guide. This will be a very detailed step-by-step guide. The guide will begin with the XGD2 discs and go on to cover burning XGD3 discs.

What You Will Need to burn successful XGD2 and XGD3 XBox360 backups.

  • Latest iXtreme Firmware update for your XBox360

      iXtreme LT+ 2.0 Firmware (12.1 MiB, 1,789 hits)

  • A DVD burner compatible with iXtreme Burner Max Firmware (Buy on Amazon)
    • Liteon iHAS124B = baseline model
    • Liteon iHAS224B = 124 + LightScribe
    • Liteon iHAS324B = 124 + SmartErase
    • Liteon iHAS424B = 124 + LightScribe + SmartErase
    • Liteon iHAS524B = 124 + LabelTag + SmartErase
    • Liteon iHAS624B = 124 + LabelTag + LightScribe + SmartErase
  • iXtreme Burner Max Firmware

      iXtreme Burner Max Firmware (11.5 MiB, 2,904 hits)

  • Verbatim Dual Layer DVD’s (Buy on Amazon)
  • isoBurn 1.3 or later (Mac App Store) – to support burning XGD3 with the recently released iXtreme Burner Max Firmware. isoBurn 1.2 will still burn XGD3 discs but will force truncating of your ISO. isoBurn 1.3 has been submitted to the App Store for approval and should be available sometime this week if all goes well. There are already plans for isoBurn 1.4 that will have more features and functionality. 1.4 should be available at the beginning of next month.

What are XGD2 discs?

XGD2 (XBox Game Disc 2) is the original disc format used by Microsoft for all XBox 360 games. This format is basically the capacity of a Dual Layer DVD.

What are XGD3 discs?

XGD3 (XBox Game Disc 3) is a new format developed by Microsoft to help prevent piracy by using the extra layer of the outside of the disc basically increasing the capacity and therefore using more space then is currently available on all dual layer dvd’s on the market.

What is Truncating?

Truncating is a process by which the item being truncated is sized to a particular length. Taking a number for example 3.141592654. What if we only have 3 available boxes to fit this number into? By using truncation we could truncate this number down to 3.14, do we need the other numbers? NO we don’t. Does 3.14 change drastically because we’ve truncated it to 3 digits? NO it doesn’t.

When we truncate an ISO, all we are doing is cutting off the end of the file, most of it being meaningless data that is not needed. We do this to change the size of the ISO so that it can fit onto a standard dual layer disc.

A word of warning about truncating. In some circumstances the data being cut off while truncating contains important security information that is sometimes required for validation and could quite possibly get you banned from XBox Live. You should only use truncation as a last resort for burning XGD3 discs and when you do, make sure that you do not game online.

Layer Breaks

What is a Layer Break? A Layer Break simply put, specifies at which point on the disc, the first layer should end and the second layer should start. It has been my experience that you can set the layer break lower but not higher then what the maximum layer break supported by the media is.

Layer Breaks were first introduced to the XBox 360 scene when making backups became available. To burn a successful backup, you would have to enter a layer break that was different from the one that would be set by default.

Since we first started hearing about layer breaks several years ago, there hasn’t been much of a change, until recently. Microsoft developed a new disc format which would hold a slightly higher capacity then what is supported on all current Dual Layer DVD’s. With that came a new layer break.

It just so happens that this Layer Break is higher then the maximum supported layer break for current Dual Layer DVD’s. What does this mean? Well, on a Mac, if you try to set a layer break that is higher then the max supported by the media, the mac doesn’t know what it should do and will kindly give you your media back.

So how do we get around this issue? The very first fix was to truncate the ISO file since it was believed that the information at the end of the file was not relevant to game play. So to burn, you would truncate the ISO to the full size available on the blank Dual Layer DVD and then burn with the maximum supported layer break and your XBox360 drive firmware would take care of the rest. Keep in mind that this layer break again, was different then that used for XGD2 discs. So we are now at 3 separate Layer Breaks.

The most recent fix which seems to be the most successful is a firmware by iXtreme that will enable you to burn Dual Layer DVD’s at a higher capacity by way of overburning allowing you to use the correct layer break without having to truncate the ISO file. This method requires a special burner as well as the iXtreme Burner Max firmware.

So, what are the 3 layer breaks and when should you use them?

  • Layer Break 1 – 1913760
    - This is the original layer break and should be used with all XBox360 backups that are not labeled as being XGD3 discs.
  • Layer Break 2 - 2086912
    - This layer break can be used for XGD3 discs but only if you are truncating the ISO file to fit onto a Dual Layer DVD.
  • Layer Break 3 – 2133520
    - This layer break can be used for XGD3 discs. ONLY use this layer break if you are burning with an iXtreme Burner Max firmware updated burner that can burn the full ISO file without truncating. If you attempt to use this layer break without the special burner, your disc will be ejected.

Media

So, what media should you use when burning XGD2, XGD3, backups? Let’s take a quick second and address this. Why? because this is where most people do not believe us when we say ONLY USE VERBATIM MEDIA. Do not attempt to use anything other then Verbatim. Verbatim has been proven to be the most successful when burning backups. So unless you want to burn coasters / have your burn fail have way through, have problems with verification, etc… buy Verbatim.

Let’s put it this way, if you post a comment asking why your burn failed and I ask you what media you are using, you better answer with. “Verbatim”. If you say anything other then Verbatim, I will not help you.

Let me also add… ONLY BURN AT 2X / 2.4X. Never Never Never burn any higher then 2X. If you are impatient and you can’t wait 45 minutes for a backup to finish burning, then go ahead, burn at 4X or even at 6X and watch your burn fail or experience glitches while playing, etc… Bottom line, the amount of time you would spend burning again and again because you are using crappy media and or using a burn speed that is set too high could have been spent playing the game had you used VERBATIM MEDIA and burned at 2X speed.

So, what Media do you use and what speed do you burn at?

  • Verbatim Media (Particularly MKM-003) I’ve heard from a trusted source that they are much better because of the specific dye being used
  • 2x

Burners

So what about burners? Can the internal burner on your Mac burn XGD2 / XGD3? For the most part, yes it can. I’ve tested backups on early iMacs and MacBooks as well as a Mac Mini without issues but with the occasional coaster of course. Why do the burns sometimes work perfectly and other times they don’t? It’s because the internal burners that come with your Mac are pretty much crap, its as simple as that.

So what can you do? You can try to go through the hassle of replacing your internal burner which is a real pain or you can go purchase an external burner.

The latter leaves you with a plethora of options, in an almost overwhelming way… Which burner should I get, there are literally thousands of different ones. I will make a suggestion for you and even provide you with a link to the burner you should purchase. This particular burner I am talking about will allow you to in conjunction with isoBurn, burn backups without having to truncate your ISO file. All you have to do is flash the burner with iXtreme Burner Max firmware and voila just like magic you have now turned your Dual Layer DVD media into a higher capacity disc, that now has just enough space to hold a full XGD3 format ISO.

So, what is this magical burner? There are several models that are compatible with the firmware.

  • Liteon iHAS124B = baseline model
  • Liteon iHAS224B = 124 + LightScribe
  • Liteon iHAS324B = 124 + SmartErase
  • Liteon iHAS424B = 124 + LightScribe + SmartErase
  • Liteon iHAS524B = 124 + LabelTag + SmartErase
  • Liteon iHAS624B = 124 + LabelTag + LightScribe + SmartErase
As you can see here, you’ve got plenty of models to choose from. So if you are going to purchase an external burner you may as well purchase one that is compatible with the iXtreme Burner Max firmware so that you can burn XGD3 discs at 100% without having to truncate. You can pick these up from Amazon, NewEgg, etc… or if you’re lucky, check out your local Walmart. I found that Walmart is currently selling the iHAS324B for $25.00.
Hey, so I thought this was supposed to be a burning guide and not an informational post? Well, I thought I would educate everyone, bring them up to speed so that when I go through the guide, that everyone can understand it and then maybe there won’t be so many people out there who are confused and have no clue how to get their backup to burn.
So without further delay or blabber, here’s the guide.

Burning XGD2 / XGD3 on Mac OS X Definitive Guide

The guides below assume the following:

  • You’ve acquired an ISO file, either XGD2 or XGD3
  • You’ve purchased isoBurn 1.2, 1.3 or 1.4
  • You’ve verified your ISO file using abgx360 (Note: At the time of this post abgx360 is unable to verify XGD3 ISO’s)
  • You have Verbatim media and understand that using anything other then Verbatim could result in bad burns aka coasters.
  • You understand that you must burn at 2x
  • You understand Layer Breaks and their differences
  • You understand the difference between XGD2 and XGD3
If you’ve read the more info

first part of this guide then all of the above items should make sense to you.

Burning XGD2 / XGD3 with isoBurn 1.2

Note: isoBurn 1.2 currently does not support iXtreme Burner Max Firmware. You can still burn XGD3 discs with isoBurn 1.2 but the ISO file will need to be truncated which for the most part is not an issue. XGD2 games burn normally.

isoBurn 1.2, the version currently available on the Mac App Store is able to burn both XGD2 and XGD3 discs without issues. isoBurn will produce 100% playable backups.

To use this guide you will need the following:

  • isoBurn 1.2 (Mac App Store)
  • Verbatim Media
  • An ISO of an XBox 360 backup
After you’ve downloaded and installed isoBurn, go ahead and launch it, you will see a window similar to the image below:
This is the main interface for isoBurn 1.2. As you can see, there are not very many options. This makes isoBurn very simple to use. The following are the steps to burn XGD2 / XGD3 backups with isoBurn 1.2:
Burning XGD2 backups with isoBurn 1.2:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2x
  • Set your layer break - 1913760 – NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you
  • Check the box next to Layer Break to enable it.
  • Click Burn
  • Wait for isoBurn to finish. You’re Done
Burning XGD3 backups with isoBurn 1.2:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2x
  • Set your layer break - 2086912 – NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you and will be INCORRECT. You must manually set the layer break to 2086912 or isoBurn will eject the disc and will not burn.
  • Check the box next to Layer Break to enable it if it isn’t checked already.
  • Click Burn
  • An alert box will pop up asking you to truncate your ISO
  • Click OK
  • Wait for isoBurn to finish. You’re Done

Burning XGD2 / XGD3 with isoBurn 1.3

Note: isoBurn 1.3 will not be available until it has been approved by Apple. isoBurn 1.3 fully supports XGD3 burning and is 100% compatible with iXtreme Burner Max firmware so it will burn XGD3 without having to truncate the ISO file. XGD2 games burn normally.

isoBurn 1.3, currently awaiting approval from Apple is able to burn both XGD2 and XGD3 discs without issues. isoBurn will produce 100% playable backups.

To use this guide you will need the following:

  • isoBurn 1.3 (Mac App Store)
  • Verbatim Media
  • An ISO of an XBox 360 backup
  • A burner flashed with iXtreme Burner Max (Optional – If you want to burn full XGD3 without truncating)
After you’ve downloaded and installed isoBurn, go ahead and launch it, you will see a window similar to the image below:
Although not very apparent, you’ll notice a very small change in isoBurn 1.3 from isoBurn 1.2. With isoBurn 1.3 a verification option was added which is needed to verify 100% successful  burns of XGD3 discs… YES, ALWAYS VERIFY YOUR BURN. The following are the steps to burn XGD2 / XGD3 backups with isoBurn 1.3:
Burning XGD2 backups with isoBurn 1.3:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2x
  • Set your layer break - 1913760 - NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you
  • Check the box next to Layer Break to enable it.
  • Click Burn
  • Wait for isoBurn to finish. You’re Done
Burning XGD3 backups with isoBurn 1.3 – Truncating Method:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2x
  • Set your layer break - 2086912 - NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you and will be INCORRECT. You must manually set the layer break to 2086912 or isoBurn will eject the disc and will not burn.
  • Check the box next to Layer Break to enable it if it isn’t checked already.
  • Click Burn
  • An alert box will pop up asking if you would like to Truncate, Try Without Truncating or Cancel
  • Click OK to Truncate
  • Wait for isoBurn to finish. You’re Done
Burning XGD3 backups with isoBurn 1.3 – iXtreme Burner Max Firmware Method:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2x
  • Set your layer break - 2133520 – NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you
  • Check the box next to Layer Break to enable it if it isn’t checked already.
  • Check the box to Verify After Burn
  • Click Burn
  • An alert box will pop up asking if you would like to Truncate, Try Without Truncating or Cancel
  • Click Try Without Truncating
  • Wait for isoBurn to finish burning
  • Wait for isoBurn to finish verifying. You’re Done

Burning XGD2 / XGD3 with isoBurn 1.4

isoBurn 1.4, currently available on the Mac App Store is able to burn both XGD2 and XGD3 discs without issues. isoBurn 1.4 fully supports XGD3 burning and is 100% compatible with iXtreme Burner Max firmware so it will burn XGD3 without having to truncate the ISO file. XGD2 games burn normally.

To use this guide you will need the following:

  • isoBurn 1.4 (Mac App Store)
  • Verbatim 2.4x Media
  • An ISO of an XBox 360 backup
  • A burner flashed with iXtreme Burner Max (Optional – If you want to burn full XGD3 without truncating)
Enhancements to this version:
  • Added Optimal Layer Break button, for auto setting the layer break for XGD3 discs (Truncating / Full Burn)
  • Added Cancel button to the burn dialog so that you can cancel the burn process
  • Added Alert Popup to alert you if an error occurred
  • Added Alert Popup to alert you when the burn finished
  • Added Alert Sound to alert you if an error occurred
  • Added Alert Sound to alert you when the burn finished
  • Added Data Transfer Rate to the burn dialog
  • Added Burn Speed to the burn dialog
After you’ve downloaded and installed isoBurn, go ahead and launch it, you will see a window similar to the image below:

Although not very apparent, you’ll notice a very small change in isoBurn 1.4 from isoBurn 1.3. With isoBurn 1.4 an Optimal Layer Break button was added which helps you set the layer break by detecting the media size and determining the maximum layer break. isoBurn with the help of the Optimal Layer Break button will auto set the layer break for you for XGD3 discs. For XGD2 it is still necessary to enter 1913760 for the layer break. The following are the steps to burn XGD2 / XGD3 backups with isoBurn 1.4:
Burning XGD2 backups with isoBurn 1.4:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2.4x
  • Set your layer break - 1913760 - NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you
  • Check the box next to Layer Break to enable it.
  • Click Burn
  • Wait for isoBurn to finish. You’re Done
Burning XGD3 backups with isoBurn 1.4 – Truncating Method:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2.4x
  • Set your layer break by clicking on the Optimal Layer Break button or enter it manually - 2086912 - NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you and will be INCORRECT. You must manually set the layer break to 2086912 or isoBurn will eject the disc and will not burn.
  • Check the box next to Layer Break to enable it if it isn’t checked already.
  • Click Burn
  • An alert box will pop up asking if you would like to Truncate or Cancel
  • Click OK to Truncate
  • Wait for isoBurn to finish. You’re Done
Burning XGD3 backups with isoBurn 1.4 – iXtreme Burner Max Firmware Method:
  • Drag your ISO / DVD file into the “Drop your disc image here” box. isoBurn will tell you the File Name, File Type and File Size.
  • Select your burner
  • Insert your blank Dual Layer DVD ONLY VERBATIM
  • Select your write speed, ONLY BURN AT 2.4x
  • Set your layer break by clicking on the Optimal Layer Break button or enter it manually - 2133520 - NOTE: If you used the .dvd instead of the .iso file the layer break will be auto populated for you
  • Check the box next to Layer Break to enable it if it isn’t checked already.
  • Check the box to Verify After Burn
  • Click Burn
  • Wait for isoBurn to finish burning
  • Wait for isoBurn to finish verifying. You’re Done

 

If you have any questions that this guide doesn’t cover, feel free to ask. If you think any of the information in this guide is incorrect, please contact me and I will verify and correct the guide.

If you’ve read the entire guide and followed it word for word, number for number and you are getting coasters then you haven’t followed the guide word for word, number for number OR you may have a batch of defective media which isn’t likely but possible or your burner is defective which is more likely.

I hope that you all have enjoyed reading this guide as much as I’ve enjoyed writing it. Seriously, I’m probably the only person with a blog that hates writing.. haha.

Similar Posts:

VN:F [1.9.22_1171]
Rating: 8.9/10 (9 votes cast)
VN:F [1.9.22_1171]
Rating: +3 (from 7 votes)
Definitive XBox 360 Mac Burning Guide, 8.9 out of 10 based on 9 ratings
Be Sociable, Share!

Comments

84 Responses to “Definitive XBox 360 Mac Burning Guide”
  1. Paul says:

    Yeah i have no idea how to use Kprobe ???

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  2. Alexis says:

    Hi Chris,
    Thank you for your work on isoBurn.
    I saw a lot of messages from others users saying they’re having a problem after burning successfully their game. When you start the game in the xbox, it goes right back to the menu saying “disc not supported”

    I’ve already burned and used xgd3 games with isoBurn but it’s been 3 games since I have this error.

    Can you help me with this ?
    Thx, hugs from Bordeaux France !

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  3. Chris says:

    Is this only happening with XGD3 games or older games as well? what games specifically are you trying to burn?

    VN:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  4. Excellent article … thank you for sharing. Milan Wedgworth

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  5. louis says:

    icant flash my Liteon iHAS124C cant find the firmware only the update, can you please help me.

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  6. Abel says:

    Now there is Isoburn version 1.6

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  7. thedavemc says:

    HI, I’m having a problem with isoBurnn 1.6 and an ihas124.

    The drive has been flashed to burner max as per the tutorials, all appeared to complete successfully.

    The drive is visible in isoburn, but the speed option is greyed out and no media info is displayed. I’ve also tried it out in imgburn and get Device not ready (Medium not present – tray closed). So obviously it’s not a problem with isoburn specifically but I thought I’d try a question on here as I’ve spent the past 2 days following every suggestion I could find without success. Hopefully someone may have an idea.

    I have tried reflashing the eeprom and firmware back to stock and starting again – I’ve run through the entire flashing process twice and also tried crossflashing to 524. Every time I get the same message. I’ve been power cycling the drive and restarting after every stage.
    The drive shows up fine in windows and osx and the disks identify themselves as verbatim 003s in my superdrive.

    Was thinking something must be wrong with the firmware – is there a more complete way to return to stock I’m not doing? Or any other ideas to try?

    Cheers, Dave

    VA:F [1.9.22_1171]
    Rating: 5.0/5 (1 vote cast)
    VA:F [1.9.22_1171]
    Rating: +2 (from 2 votes)
  8. Mark says:

    Hey Chris,

    Same problem as Alexis. I’m on LT 3.0 and I’m getting the “disc is unsupported error” with both XGD3 AND XGD2 games. I’m using isoBURN 1.6. Any ideas?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  9. Mark says:

    Apologies, I am getting “cannot read disc” error. I have truncated burned two games, SSX Tricky (xgd2) and MMA 3 (XGD2) as well. Again I am using isoBURN 1.6 and have fully run these games through agbx360. Suggestions?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  10. Mark says:

    Can you please post a guide for ihass drive burning with isoburn for 1.6

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  11. Vernon says:

    I’m thinking I would like you to mod my xbox 360 for me :D

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: -1 (from 1 vote)
  12. Vernon says:

    Oh and btw if you can, mod the iHas drive. I have been through so many tutorials and the majority of them say I need to have other equipment/materials besides just the external burner, sata to usb cables etc. Im starting to think this whole modding is pretty costly and would cost me the same amount or more when you offer to mod it for a flat fee. And then its even more difficult to on a mac…I have modded a psp but this is no comparison LOL. I need a professional to do this for me

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: -1 (from 1 vote)
  13. Haytam says:

    Hello Chris,

    i got the same problem than Mark, all the games that i burned with the version 1.4 were working without any problem. But with the version 1.6 the xbox say ” unsupported disc error”, any solution ? is it possible the come back to the version 1.4 ? thank you for your help

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  14. Johnny says:

    I have a problem, my imac won’t detect my ihas 324 for some reason can you help me?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  15. Johnny says:

    Disregard my last message. Why can’t I burn the dvd without truncate? I have and ihas 324 flashed with ixtreme

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  16. asapreta says:

    I’m having exctly the same problem as thedavemc described:

    thedavemc says:
    March 11, 2012 at 3:03 am
    HI, I’m having a problem with isoBurnn 1.6 and an ihas124.

    The drive has been flashed to burner max as per the tutorials, all appeared to complete successfully.

    The drive is visible in isoburn, but the speed option is greyed out and no media info is displayed. I’ve also tried it out in imgburn and get Device not ready (Medium not present – tray closed). So obviously it’s not a problem with isoburn specifically but I thought I’d try a question on here as I’ve spent the past 2 days following every suggestion I could find without success. Hopefully someone may have an idea.

    (….)
    Cheers, Dave

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  17. Scott Phillips says:

    Chris,

    I just bought ISOBurn from the Mac App Store. I have a flashed iHas that I have used to burn plenty of discs perfectly through Windows/IMG Burn. However, pretty much any setting I choose in ISOBurn 1.6 I can’t get the game to work in my xbox. I have tried just about everything. PLEASE update your blog with some instruction for those of use with 1.6!

    THANKS!

    VA:F [1.9.22_1171]
    Rating: 5.0/5 (1 vote cast)
    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  18. Andrew says:

    Maybe a stupid question, but when I buy the drive how do I hook it up to my mac? Do I need to use an eSATA cable straight to the mobo?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  19. Joost says:

    Hey Chris!
    Thanks for the app, it’s awesome. Too bad I got a ‘disc drive didn’t respond properly’ error. Could that be because I’m using the built in dvd burner? Other games worked perfectly.
    Do you have some tips? Guess I’ll need a external liteon drive after all :p
    Thanks in advance!

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  20. andy says:

    does this support overburning?

    as my .dvd file is 8.54gb and is at 102% can it overburn same as imgburn on a windows pc

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  21. Eric Love says:

    Was wondering if anything changed on the guide for the latest version of isoBurn (1.6 at the time of this writing)?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  22. Chris says:

    @andy

    Yes, isoBurn does support overburning but only if you are using the burner mentioned in the tutorial.

    Chris

    VN:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  23. Eric Love says:

    I have been Burning games for ages using OSx360 and Verbatim discs. Recently, I have been only been able to burn coasters using every method I can think of (OSx360, ImgBurn and now isoBurn).

    EVERY disc, when put in the Xbox360 only offers “Play DVD” and not “Play Game”. If the disc launches, it merely goes to a white screen displaying the Xbox logo and sits there indefinitely. To me, that the sign of an improper burn, but I get it with EVERY disc burned in Windows or the Mac now.

    Anyone have an idea what might have changed in the last 3-4 months that I might be overlooking? It’s driving me MAD.

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  24. Eric Love says:

    I might add to the above post:

    All of the games I am trying to burn are XG2 discs, making it that more annoying.

    My Mac is a Mac Pro eight core 2.8GHz machine with 14GBs of RAM and Mac OS 10.6.8

    Windows (for ImgBurn) is Win7 with all curent updates and service packs.

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  25. Pezbear says:

    Why would you be using OSx360 ???

    You need to get isoburn from the app store
    I only burn .iso files that 7.84gb in size (XGD2 ) with my Imac using isoburn

    For Games 8.74gb in size (XDG3 ) i use an ihas burner connected to my Imac and use isoburn

    I get 100% burn everytime and 100% verification

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  26. Eric Love says:

    Pezbear -

    I AM using isoBurn now, but am burning a coaster EVERY time. I’ve tried ImgBurn on Windows, also, with the same result. I’ve tried both my internal burners (TSST Corp and the original SuperDrive) and an iHAS attached via an SATA to USB adapter to no avail.

    Any ideas?

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  27. Pezbear says:

    @ Eric Love

    I am assuming that the iHas Burner is correctly flashed.. ?
    Are you following the Burning Tutorial correctly on this site for isoburn ?
    Are you setting the correct LAYER BREAK for the specified .iso ?
    Are ALL your apps closed off ( Safari , mail etc ) ?

    As i mentioned before i burn XGD2 discs in my Imac Drive and burn XGD3 in my iHas drive which is attached with the same set up u mentioned.

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  28. James says:

    Using IsoBurn 1.6 I am getting the same thing where it will not let me choose a speed to burn with the IHAS424 B, With GL1A Firmware.

    The link for iXtreme Burner Max Firmware at the top is broken as well. Any advice would be appreciated!

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  29. Ilian says:

    I had burnt few games the last few days, today I am trying again and surprise – isoburn is deleting my ISO files leaving them with 0 bytes, as soon as I click “Burn”, nothing happens, but the ISO file goes to 0 bytes from 7.5 Gigs or whatever the size was … could not recover the files , even rebooted the iMac and no go … any help would be appreciated ….

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  30. Djxxx says:

    I have got a new imac 2013 model. I have 4 USB ports and 2 thunderbolt ports.. How do I get a sata connection to connect my ihas124b drive… I have tried 3 different USB to sata devices but they don’t work.. I can get mains to the drive which is no problem.. When you search on compatibility of drive it says it’s not compatible with imac.. I’ve asked on many forums but no one has any idea.. So if you have connected this drive what have you bought and where can I get it from…

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  31. Djxxx says:

    I have also tried x360usb , x360usb pro to get a sata port to connect imac to ihas 124b drive… When the tray is closed the motor on the drive keeps revving up but if I eject tray the motor stops and the backup software finds the drive.. It does say ihas124b .. But when on close tray again the motor revs up and down again and the drive in the backup software goes… Does anyone on here know what the problem is? The drive is fine as it works perfectly in pc and burns full xgd3 with burner max firmware….

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  32. Djxxx says:

    All sorted now as it was the power going to the drive… It was wrong voltage.. No harm done to the drive as I have correct voltage now…

    VA:F [1.9.22_1171]
    Rating: 0.0/5 (0 votes cast)
    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)

Trackbacks

Check out what others are saying about this post...
  1. [...] of this title, but will be included with purchase. This game is playable without the 3D glasses. Title: Attack of the Movies 3D Publisher: Majesco Platform: Xbox 360Genre: ShooterRelease Date: 5/20…e, but will be included with purchase. This game is playable without the 3D glasses. WordPress [...]



Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!