NOTE: This will only work with backup copies of Wii Games, there is currently no support for the internal DVD drives that come standard in any Mac for reading original Wii discs.

In an effort to keep things simple, this is a follow-up of my tutorial on How To Backup And Burn Wii Games On A Mac. I have developed an application that allows you to simply insert the Wii Game into your DVD Drive and then select a location and name for your ISO and simply click on Backup Wii Game.

NOTE: This is an Alpha release of WiiOSx, I will need to receive a lot of feedback as far as functionality is concerned. WiiOSx has been tested on OS X 10.5 and works without any issues. Please leave comments and let me know what you’d like to see in future releases as well as any bugs you may experience.

Just follow the simple step by step Tutorial Below:

WiiOSx Tutorial:


Download WiiOSx, extract and then Launch the Application.

WiiOSx - Main Menu

WiiOSx - Main Menu

Insert your Wii Game that you want to Backup, Finder should pop up and say that you inserted a blank DVD. Click on Ignore. Now you should see information for Media Type and BSD Name. This information is not important but it should say something other then No Disc.

Click on Select and choose where to save your image and give it a name and then click Save

WiiOSx - Select

WiiOSx - Select

You should now see your chosen location and image name appear next to the Select Button. 

WiiOSx - Location

WiiOSx - Location

If this is correct then you can proceed to click on Backup Wii Game, you should then be presented with a progress bar. Wait for it to finish and then burn with Disk Utility. You can follow my other tutorial for that bit. http://chris-fletcher.com/2009/05/17/backup-and-burn-wii-games-on-a-mac/

WiiOSx - Progress

WiiOSx - Progress

Download WiiOSx

[poll id="7"]

I will not charge for WiiOSx but I’m hoping that I’ll at least receive some donations for my hard work. You can use the form below to donate any amount you wish.

[donateplus] [donorwall title='Donor Recognition Wall']

This is a tutorial on How To Stealth Path your XBOX 360 games on a Mac. After much searching on google I have had a really difficult time finding anything to help me stealth patch XBOX 360 games on Mac that I’ve downloaded from the internet.

OSx360 Stealth Not Verified

OSx360 Stealth Not Verified


So this is sort of a follow up tutorial for How To Burn your XBOX 360 games on a mac. If you’ve opened OSx360 and the Stealth verification failed then you can’t burn the game and even if you could, you probably wouldn’t be able to play it in your XBOX 360 console.

This tutorial will explain in detail what you should do if Stealth doesn’t pass verification in OSx360. First you must download an application. The application we will need is called abx360, you can google for it or download it below. This application will fix an unverified stealth patch. ( Most of the time )

Download and install abgx360. Once it’s installed, open the application and then open up your ISO file of the game that didn’t pass the Stealth verification by clicking on the blue folder icon to the right of the text input field. You should have something similar to the below illustration.

abgx360 Open

abgx360 Open

Now click on the AutoFix tab and copy the settings below.

abgx360 AutoFix Tab

abgx360 AutoFix Tab


When you have everything set correctly you can click on the blue Launch button at the very bottom it should turn green when you hover over it with your mouse.

abgx360 Launch

abgx360 Launch


After clicking on the Launch button, a Terminal window should open and you should start seeing a bunch of text similar to the below. DO NOT INTERRUPT THIS PROCESS. Let it do its thing.

Notice the lines in Red, the game I am working with has a blank DMI, a blank PFI and my Stealth check has failed. These are all bad things and fortunately are all things that abgx360 will fix for us.

abgx360 Terminal

abgx360 Terminal


 You will notice that towards the bottom you’ll see some nice green lines of text. PFI, DMI, Video and Stealth have all been fixed, now it just needs to verify the CRC of the ISO. Let it finish, be patient this could take a few minutes. Finally we know that the program has finished when we see the line AutoFix was successful!

You can now close the Terminal and abx360. Now you can follow my tutorial on how to burn your XBOX 360 games on a mac using OSx360 and when the Verify screen pops up you should see something similar to the following.

OSx360 After ISO is fixed

OSx360 After ISO is fixed

Everything looks good, Stealth Check has passed, PFI and SS Sector Data are Valid, DMI is Valid and all is right with the world. Now go ahead and burn your game and enjoy.

Hopefully I’m not repeating what someone else has already done but like I said, I have not been able to find a good / if any tutorial on the internet. Please let me know if I missed something or you have some questions or need some help.

UPDATE: 6/21/2011 – I am in the process of finishing the development of ISO Burn which will be available on the Mac App Store hopefully sometime mid-July. Once the app becomes available I will add a new tutorial on how to burn XBOX 360 Games on a Mac using ISO Burn. To stay current, be sure to subscribe to my RSS feed.

UPDATE 6/23/2011 – isoBurn has been submitted to the Mac App Store, to read more about it and see some screen shots please visit http://empoc.com/isoburn

Burning XBOX 360 Games On A Mac is relatively simple. All you need is the ISO of the game and the right software and you’re on your way to burning 360 games on your Mac.

This application is pretty much automated and handles much of the work for you. You could probably figure out on your own how to use this application to burn your games but I’ll give you a quick walk through just in case.

Once you’re done downloading, extract the file and place OSx360 into your applications folder. Now launch OSx360 from your applications folder. You should see something like this:

OSx360 Open

OSx360 Open


Once this screen pops up, you’ll need to drag your ISO ( game image ) to the big question mark. After you drag the image to the question mark it will verify the image and you’ll see a screen similar to this one.

OSx360 Verify

OSx360 Verify


What you need to pay attention to here is making sure that everything is Valid and Everything has passed especially stealth. If you’ve downloaded an ISO that doesn’t have the stealth patch, don’t burn it or you will get banned from XBOX Live. Everything should look similar to the illustration above.

NOTE: If your ISO didn’t pass / validate everything then follow my tutorial for how to stealth patch your ISO here or everything seems to look good and the burn button doesn’t seem to do anything, then first if the extension is not ISO then you must rename it to .iso and then follow my tutorial on how to stealth patch your game. http://chris-fletcher.com/2009/06/07/how-to-stealth-patch-xbox-360-games-on-a-mac/

If everything looks good then go ahead and click on the Configuration button on the top right hand side of the application. You can mirror the configuration below. Once you’ve set your configuration settings you can close the configuration dialog.

OSx360 Configuration

OSx360 Configuration


If you haven’t done so already, go ahead and insert your blank DVD+R DL disc you might get the following popup, if you do just click on ignore and proceed to the next step.

Finder Inserted a blank DVD

Finder Inserted a blank DVD


Now you can click on the Burn button, you should get a screen similar to the below. Click burn and be patient as it takes a while to burn a dual layer DVD. I always burn at 4x and the discs turn out just fine. On a side note, I am using Memorex DVD+R DL discs and they haven’t left me hanging yet. You can pick up a pack of 15 at Wal-Mart for $20.00.

OSx360 Burn

OSx360 Burn


When the burn has completed the disc usually auto mounts and opens DVD player instructing you to eject the disc and put it into the XBOX 360. Do as it says and enjoy your game :)

I’m hoping that you’ve enjoyed the tutorial and as always if there’s anything I’ve left out or anything that you don’t understand, feel free to leave me a comment. Happy Burning

UPDATE: 6/21/2011 – I am in the process of finishing the development of ISO Burn which will be available on the Mac App Store hopefully sometime mid-July. Once the app becomes available I will add a new tutorial on how to burn XBOX 360 Games on a Mac using ISO Burn. To stay current, be sure to subscribe to my RSS feed.

So I went out and bought an XBOX 360 the other day and the first think I did after opening the box of course, is, I took it apart to have a look at the guts. I purchased the Arcade version of the 360 which came with a Lite-On DVD drive, and so the search began.

Being new to the whole XBOX community I had no idea how to go about modding it so that I can play backup’s and the tutorials on the internet are not very descriptive for a new comer. So I found a few sites with some good information and found all the tools I needed after hours of searching.

So now I’d like to give back to the community and write a very simple easy to understand tutorial, as well as providing you with all of the necessary tools and show you how to flash mod the xbox 360 to play copied games. It should be noted that this is an xbox 360 liteon drive mod and wont work for any of the other DVD drives.

This mod is considered a soft mod for the XBOX 360 and will allow you to mod the xbox 360 without a mod chip. This is done by flashing the firmware of your xbox 360 dvd-drive.

Required Software:

  • ixtreme_15.rar – Download this file, it has everything we need in it. Thanks to ixtreme we can save ourselves a lot of time.

Required Hardware:

  • A PC with an available SATA port as well as a COM ( DB-9 / Serial ) port.
  • TX Probe, Scroll down for a schematic on how to build one, or pay me $20.00 and I’ll send you one.


  • Disassemble the XBOX 360 and take out the DVD Drive – Look for a tutorial on YouTube

There are 4 Steps to this tutorial, they are:

  1. Building The TX Probe ( approximately 30 min. depending on experience )
  2. Preparing Your XBOX 360 DVD Drive ( approximately 15 min. depending on experience )
  3. Key Dumping ( approximately 5 min. depending on experience )
  4. Flashing ( approximately 5 min. depending on experience )

Total Time:

  • Disassemble XBOX 360 — 30 min
  • Follow My Tutorial — 55 min
  • Reassemble XBOX 360 — 20 min
  • Playing Any Game You Want — Timeless !! :)

Building The TX Probe:

For your convenience I have hyperlinked all the parts back to their respective Radio Shack links.

TX Probe Schematic

TX Probe Schematic

Parts List:

Tools List:

Optional ( To Make It Look Nice ):

  • Enclosure
  • PC Board

(All of these parts should be readily available at Radio Shack)

Note: Don’t want to build one yourself ? or can’t seem to do it right ? Purchase one from me. I’m selling them for $40.00 each.

Click The Button to add it to the cart [wp_eStore:product_id:5:end]

Preparing The XBOX 360 DVD Drive:

Before we can do anything else we need to make sure that the XBOX 360′s DVD drive is half open. To do this push the eject button on the XBOX and after the drive is fully open remove the connection cable from the back of the drive and then push the tray until it is half open. DO NOT RECONNECT THE CABLE YET.

Before we reconnect the cable we need to remove pin 3. This pin controls the opening / closing of the tray. With this pin removed the XBOX will not be able to eject or close the drive tray.

Now that we have the DVD drive set the way we want we can move on to the next step.

Key Dumping:

Connect your XBOX 360′s DVD drive via the SATA cable to your computers SATA port and power on your drive. If you are powering your drive from the XBOX 360, then make sure that you removed Pin 3 from the connection cable before turning the 360 on.

Back of DVD Drive

Assuming that you’ve already downloaded ixtreme_1.5.rar we can move right along and open up jungleflasher.exe which you can find in the JungleFlasher .26 BETA folder within the folder that has the extracted contents of ixtreme_1.5.rar

Probing TX Point

Probing TX Point

  • Go to the DVDKey32 tab and go through the I/O ports until you see the info for your liteon drive under drive properties.
  • Make sure your drive is ejected and pushed in half way. Select your COM port, connect your TX Probe and probe to the Tx (R707) point while pressing the Get Key Button.
  • Save all the files to a folder

Note: If you get an error saying your hardware isn’t working. check over the adapter make sure everything is correct. try testing it with a multimeter. If all else fails, you may need to buy/build a “proper” max232/max3232 adapter.

If the above step worked, dump the key another two times just to be sure you get the same key! and SAVE ALL THE BIN FILES TO A DISK OR USB STICKTHIS IS YOUR BACKUP LIFELINE.

  • Go to the FirmwareTool32 tab and click Load From Dump Files.
  • Select the files you saved previously, and chose where to save the dummy.bin
  • Click Open Target Firmware and select ix15-liteon.bin which you extracted from ixtreme_1.5.rar. It should show YOUR KEY in the box
  • Press Spoof Source to Target and save your CFW.bin

You should now have the keys dumped, and your new firmware spoofed. We can now proceed to the next and final step.


Now that we have everything prepared, we can flash the firmware of the DVD drive. Up until now we have not modified anything on the DVD drive. If you want you can put your XBOX 360 back together right now and it will still work.

Although its almost impossible to brick your drive with this method, there’s still that 1% chance that something can go wrong. Please know that I am not responsible for what happens to your 360. If you don’t feel comfortable doing it yourself then scroll down to the bottom and read my instructions for sending me your XBOX 360 so that I can do the mod for you.

  • Turn your DVD drive off and then back on, then go to the MTK Flash 32 tab. select the sata port which displays the info for your liteon.
  • Press Lite-On-Erase.
  • Once you see the “…” quickly turn your drive off and back on.
  • When that’s finished it should display xx72 and some flash information. this means your drive is ready to be flashed!
  • Click the Write button. It should flash and verify all 4 sectors. if all goes well you are done!

Hopefully just as with my other tutorials, you have enjoyed this one or at least found it useful or helpful. Well as always if I left something out or there’s something I could simplify then leave me a comment and I’d be happy to edit the tutorial.

Purchase TX Probe:

$40.00 is all it will cost you, the TX Probe is required for Flashing Lite-On DVD drives since the drives keys need to be dumped and spoofed.

Just click the Add To Cart Button and checkout. [wp_eStore:product_id:5:end]

Purchase XBOX 360 Mod:

$50.00 Flat Fee To Mod ANY Version of the XBOX 360

Price Includes, MODDING of 360′s DVD Drive, CD containing your DVD Drives Orginal Firmware, Key, Identify and Inquiry .bin files, and one (1) backup game of your choice!

NOTE: Your Xbox360 will have to be opened to apply the hack which WILL VOID your Warranty if you have one, or you can take the Warranty sticker off under the faceplate (some are small and silver, others are a big white/green square)

I offer no compensation or guarantee for you voiding your warranty while trying to take it off, by getting me to mod your console you accept that your warranty(If still valid and not removed) WILL BE VOIDED!

How To Order:

Leave me a comment with your e-mail address and I’ll send you a payment link with a ship to address and instructions.

XBOX 360 Modding FAQ:

Q: Can my 360 be flashed back to its original unmodded state?
A: YES! When you get your 360 flashed by me, I will give you a CD which contains the DVD drives original Firmware for that very reason! Please keep the CD safe and don’t lose it.

Q: Do you offer a guarantee or replace my 360 if you break it?
A: No I offer no guarantee, but if your 360 gets messed up while flashing, I will replace it free of charge.

Q: Once my xbox 360 is modded, is there any way I can accidentally brick, break or ruin my xbox 360 or the MOD(or hack) will mess up or ruin my xbox 360?
A: NO. The MOD (or hack) is applied to the DVD drive itself, nothing inside the 360(Mainboard, CPU, GPU, etc) is touched. The MOD is a “Firmware” hack and its physically impossible for it to ruin/brick/mess up your Xbox 360.

Q: Can I play on Xbox LIVE without getting banned?
A: YES! The latest hacked firmware (iXtreme 1.51) offers excellent protection from getting banned from Xbox LIVE. There is always a risk of getting banned, but the chances are very low. You can safely play Wave 3 games now without worry of being banned! There is always a risk of getting banned, but the chances are very low. You can only be banned from playing an improperly burned game or someone who is inexperienced and flashed your xbox wrong.

Q: Do you offer compensation if I get banned from Xbox LIVE?
A: NO. I offer no guarantee/compensation of ANY kind if you get banned from XB LIVE.

Q: Is this LEGAL?
A: YES. Having backups of games is LEGAL if you own the original copy. See legal Disclaimer below…

Legal Disclaimer-

Copying or downloading games that you have not legally purchased or own is illegal in all countries. This violates not only laws in your own country, but international copyright laws as well. The purpose of the firmware hack is for making backup copies of games that you legally own. Software piracy is illegal carries a huge penalty if convicted, is ethically wrong, and hurts the game companies. Support the game developers by purchasing the games you play. You wouldn’t work for free would you? I am offering a SERVICE to those who cannot make backups of the games they legally own. I am not charging money for the game, but for materials, wear and tear on our dvd burners and for making the backup. Chris Fletcher is not affiliated with ANY of the companies, Microsoft, Xbox 360 or any others.

NOTE: This will only work with backup copies of Wii Games, there is currently no support for the internal DVD drives that come standard in any Mac for reading original Wii discs.

I was surprised to find the lack of tutorials on the internet showing you how to backup and burn your Wii Games on a Mac. So after figuring it out myself, I thought I would share it with everyone else. Following my tutorial you will see how easy it is to backup your Wii Game and Burn it, using only the tools that come pre-installed on your Mac.

NEW: Check out my new post on Backing Up Your Wii Game. I developed an Application. WiiOSx


Backing Up Your Wii Game:

  • Insert your Wii Game into your Mac’s DVD drive. Since the Mac cannot interpret the filesystem that the Wii Games use it will think that you inserted a blank disc. You should see a popup similar to the following. Click on Ignore
You Inserted a blank DVD

You Inserted a blank DVD

  • Open Terminal, it’s located in Applications -> Utilities -> Terminal
  • After Terminal launches you should type the following drutil status. Then press Enter, you should have a screen with information similar to the following screen shot.
Wii - drutil status

Wii - drutil status

  • If you look at the output from drutil, I highlighted in blue the information that we will need to use from the output. What you are looking at is the path to your DVD drive. In my case the path is /dev/disk1
  • Next you will need to type the following command dd if=/dev/disk1 of=/MarioKart.iso where if= is the path to your DVD drive and of= is the path and name to save the image file as. Press enter after typing in this line. On my Mac the process takes approximately 15 min. There is no progress bar so just be patient.
  • When the program is done, you should see output similar to the following screenshot.
Wii - Output from dd

Wii - Output from dd

  • At this point you can type the following drutil eject . This will eject your Wii game from your Mac’s DVD drive. You should now have an ISO image of your Wii Game, and if you followed my tutorial your game should be located at the root of your Macintosh Hard Drive. That’s it, that’s all it takes to make a backup of a Wii Game.

Backing Up Your Wii Game Overview:

  1. Insert the Wii Game disc into your DVD drive.
  2. Click Ignore
  3. Open Terminal ( Applications -> Utilities -> Terminal
  4. Type drutil status ( Get the Name i.e. /dev/disk1 )
  5. Type dd if=/path_to_dvd of=/game_name.iso and wait 15 min
  6. Type drutil eject to eject your game.


Burning Your Wii Game:

  • Open Disk Utility, it’s located in Applications -> Utilities -> Disk Utility. When Disk Utility opens, you should see something similar to the screenshot below.
Wii - Disk Utility

Wii - Disk Utility

  • Once Disk Utility Loads, click on Burn, you will be presented with a browse dialog. At this point you need to browse to the location where your ISO file is and click on it and then click Burn. If you don’t already have a blank disc in the drive, you will be prompted to insert one. I recommend DVD-R’s. These have worked for me 9 times out of 10

Hopefully everyone found this tutorial useful, don’t be fooled by all of these commercial programs out there that want your hard earned dollars, just to do something that you can do for free and don’t let anyone tell you that you can’t backup Wii Games on a Mac.